TVH University'nin dijital ve yüz yüze eğitim oturumları ile teknik becerilerinizi Geliştirin

Siz ve ekibiniz için

sürekli eğitim önemlidir; kazanılan beceriler, kuruluşunuzun zamandan ve paradan tasarruf etmesini sağlar.

TVH University,  forkliftler, teleskopik yükleyiciler, personel yükseltici platformlar, mini iş makinaları ve traktörler gibi endüstriyel araçlara uygun uygulamaya yönelik teknik eğitimler vermektedir.

  • İçten yanmalı motorlar, elektrik ve elektronik, hidrolik ve güç elektroniği gibi sektörle ilgili konulard sertifika alın.
  • Yılların pratik deneyimine sahip yüksek nitelikli eğitmenler
  • Kurslar hem yüz yüze eğitim sınıflarını hem de çevrimiçi eğitim paketlerini içerir

Bir eğitime kaydolun

Planlanan tüm eğitim saatlerine ait genel bakışı indirin

Önümüzdeki aylardaki tüm eğitim seanslarına ilişkin kullanışlı bir genel bakış alın ve hangi seansların size en uygun olduğunu hemen görün.

Genel bakışı indirin

Alanınızda uzman olun

İçten yanmalı motorlar, elektrik ve elektronik, hidrolik ve güç elektroniği gibi sektörle ilgili konularda uzmanlık sağlıyoruz. Teknik-ticari iş yerlerinde yeni başlayanlar ve çalışanlar için temel kursların yanı sıra deneyimli mühendisler için ileri düzey beceri kursları sunuyoruz.

İçten Yanmalı Motorlar

  • Bakım ve teşhisin sonuçları hakkında ustalık bilgisi
  • Yeni motorları ve son işlem sistemlerini korumanın en iyi yollarını öğrenin
  • Yakıt tedariğini optimize etmek için odaklanmanız gereken kilit noktaları keşfedin
  • Farklı makinelerdeki sensörleri ve aktüatörleri tanıyın ve bulun
Daha fazla bilgi edinin

Elektrikli parçalar /
Elektronikler

  • Farklı bileşenleri tanıyın ve bunları bir diyagram üzerinde konumlandırın
  • Elektrikli parçaların ve elektroniklerin çalışma prensipleri hakkında bilgi edinin
  • Modern araçları kullanarak teşhis gerçekleştirin
  • Yaygın sensörler ve aktüatörler tarafından verilen sinyalleri tanıyın
Daha fazla bilgi edinin

Hidrolikler

  • Bir makinedeki ve diyagramdaki parçaları tanıyın
  • Hidroliğin çalışma prensipleri hakkında bilgi edinin
  • Ortak bileşenlerin işlevini öğrenin
  • Hidrolik arızaları ve kusurları tespit edin ve çözün
Daha fazla bilgi edinin

Güç elektroniği

  • Arızalı hücreleri tespit etmek için bir akü raporu hazırlayın
  • Aküye göre şarj cihazı nasıl ayarlanır
  • Sorunları AC/DC motorlar ile çözün
  • Parametreleri yapılandırın ve kontrolörleri kalibre edin
Daha fazla bilgi edinin

Teknik-Ticari

  • Makinelerin işleyişi ve uygulama alanları hakkında bilgi edinin
  • Farklı bileşenleri tanıyın ve bunları bir makinede konumlandırın
  • Müşterilere parçalar ve makineler hakkında bilgi verin
Daha fazla bilgi edinin

TVH University'de kişiye özel eğitim kursları bulun

Şirketinizin ihtiyaçlarına göre hazırlanmış özel bir eğitime mi ihtiyacınız var? TVH University, eğitim merkezimizde veya sizin seçtiğiniz bir yerde düzenlenen özel eğitim kursları sunmaktadır. Özel ihtiyaçlarınızı görüşmek için bizimle iletişime geçin.

TVH University broşürünün tamamını indirin

TVH University broşürünün tamamını indirin

Ücretsiz broşürü indirmek ve teknik eğitim kurslarımıza göz atmak için aşağıdaki butona tıklayın.

Broşürü indirin

Eğitmenler

Uzmandan uzmana kişisel rehberlik

Yüksek nitelikli eğitmenlerimiz, uzmanlık alanlarında uzun yıllara dayanan pratik deneyime sahiptir ve eğitim seanslarımızdan birinde sizlerle bilgilerini paylaşmaktan mutluluk duyacaklardır.

Eğitimlerimiz şu dillerde mevcuttur: İngilizce, Fransızca, Almanca, Felemenkçe ve İspanyolca.

Katılımcıların sıkça sorduğu sorular

Eğer sorunuza yanıt bulamadıysanız,  bizimle iletişime geçin. Sizlere yardımcı olmaktan memnuniyet duyarız.

1

 

Bir eğitim oturumuna katılırken, her katılımcıya bir katılım sertifikası verilir. Yazılı sınavı başarıyla tamamlayan katılımcılara ayrıca bir bitirme sertifikası verilir.

 

E-öğrenme oturumları, kişisel bir öğrenme platformu üzerinden istediğiniz yer ve zamanda takip edilebilir. Google Meet üzerinden canlı sanal eğitimler düzenlenmektedir.

Yüz yüze oturumlar Belçika, Birleşik Krallık veya Hollanda'daki eğitim merkezlerimizde yapılır veya seçtiğiniz bir yerde (ek ücrete tabidir) düzenlenir.

 

Kurslarımız International Powered Access Federation (IPAF) tarafından tanınmaktadır. Fransa'da DataDock ve Belçika'da Educam tarafından destekleniyoruz.

 

Canlı derslerin her oturumu 1.5 saat sürmektedir. Dersler ya sabah 8.30'da ya da öğleden sonra 13'te başlar, ve seçtiğiniz eğitime bağlı olarak yarım gün ile 1 veya daha fazla gün arasında sürer.

 

TVH University binasında ücretsiz park alanımız mevcuttur. Ayrıca uçuş, taksi veya otel ayarlamanıza yardımcı olmaktan mutluluk duyarız. Seyahat ve konaklama masraflarının eğitim kursunun maliyetine dahil olmadığını lütfen unutmayın.

'Nasıl Yapılır' oturumları veya 'Tam Teknik Eğitim' sınıfları arasından seçim yapın

Nasıl Yapılır oturumları
Kısa & İnteraktif
Dijital Nasıl Yapılır Oturumları
  • 1,5 saatlik çevrimiçi oturumlar
  • Hata kodları, elektrik arızaları, yeni emisyon düzenleme sistemleri ve daha fazlası gibi belirli konulara odaklanın
  • Daha fazla bilgi için

 

'Nasıl Yapılır' oturumları sayfalarımızı ziyaret edin

Teknik eğitimler
Çevrimiçi veya yüz yüze
Çevrimiçi ve Yüz yüze Teknik Eğitim Dersleri
  • Dijital paketler: e-öğrenme + canlı sınıf oturumu
  • Pratik bir eğitim seansı ile dijital paketinizi genişletme imkanı
  • Kişiye özel eğitim sınıfları

 

'Nasıl yapılır' oturumuna veya teknik eğitim dersime kaydolun

Kayıt detayları

Digital packages

Don’t know anything about hydraulics? Then ‘Preliminary stage hydraulics’ is the perfect place to start. In this foundation course, you’ll gain insight into the operating principles of hydraulics. You’ll learn how to recognise hydraulic parts, both in a diagram and on the machine. And you’ll get to know the functions performed by the common components found in hydraulics. This course is perfect for engineers with no prior knowledge about hydraulics, and it also functions as a foundation course for people looking to undertake our ‘Introduction to mobile hydraulics’ training course. But ‘Preliminary stage hydraulics’ is not just for engineers. It’s also a great benefit if you work in a sales, warehouse, or administration role because you’ll walk away with the knowledge you need to answer technical questions.
https://www.tvh.com/training/technical-trainings/hydraulics/preliminary-stage-hydraulic

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 345
2 345
3+ 345
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
No training sessions found

Technology moves fast. If you work with hydraulics, you need to stay up to date. ‘Introduction to mobile hydraulics’ is a course in which you’ll gain insight into the latest complex hydraulic systems. You need to know the basics to fully benefit from the course, so it’s ideal for engineers who are already familiar with machine maintenance. By participating in both theoretical and practical lessons, you’ll gain skills that will help you perform maintenance more efficiently and effectively than ever. You’ll learn all about how hydraulic components function, and find out how to perform diagnostic methods that enable you to highlight specific points of attention when running a diagnostic check on a hydraulic circuit. You’ll also learn how to use a hydraulic diagram to get a deeper understanding of how a hydraulic circuit is operating.
https://www.tvh.com/training/technical-trainings/hydraulics/introduction-to-mobile-hydraulics

  • E-learning via personal learning platform - Available from 10/10/2021
  • Live virtual training , session 1 - 10/11/2021 - 09h30 - 11h00 CET
  • Live virtual training , session 2 - 24/11/2021 - 09h30 - 11h00 CET
  • Live virtual training , session 3 - 26/11/2021 - 09h30 - 11h00 CET

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 425
2 425
3+ 425
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Kasım 09

Ever wondered how batteries work? If you work with electric machines, or just want to learn more about lead-acid traction batteries and their chargers, then this course is for you. To get the most out of it, you should already have an understanding of AC/DC motors, or experience working with them. At the end of the training, you’ll understand the operating principle of batteries and chargers, and you’ll be able to run diagnostic tests on them using a hydrometer and multimeter. You’ll also be able to match batteries to the right chargers, set them up correctly, and know how to install and calibrate a conventional charger. And last but not least, you will learn how to write up a battery report.
https://www.tvh.com/training/technical-trainings/power-electronics/batteries-and-chargers

  • E-learning via personal learning platform - Available from 19/9/2021
  • Live Virtual Training - 19/10/2021 - 14h30 - 16h00 CET

 

  • E-learning via personal learning platform - Available from 25/12/2021
  • Live Virtual Training - 25/1/2022 - 09h30 - 11h00 CET

VerreikerSEMHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 195
2 195
3+ 195
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 24

Need to know why an electric machine isn’t working properly? Find out how to uncover the problem quickly. ‘Introduction to targeted fault-finding’ is a course in which you’ll learn how electric machines operate, and how to find faults as easily as possible. It’s ideal for technicians who already perform maintenance on electric machines, or those wanting to acquire the expertise to do so. No prior knowledge or experience is required. You’ll learn how electricity enables these machines to work, and gain an understanding of how the electrical components function. You’ll also discover the how to use multimeters and ammeters properly, and find out how to trace faults in both the control and main power sections of electric machines.
https://www.tvh.com/training/technical-trainings/electronics/introduction-to-targeted-fault-finding

  • E-learning via personal learning platform - Available from 05/12/2021 
  • Live Virtual Training,  session 1 - 05/1/2022 - 08h30 - 10h00 CET
  • Live Virtual Training,  session 2 - 12/1/2022 - 08H30 - 10h00 CET

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 280
2 280
3+ 280
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 04

In our ‘AC/DC motors’ course, you’ll discover how large electric motors work (pump motors and drive motors), and what they’re used for. No prior knowledge is required. This course is designed to benefit engineers who work with electric machines. You’ll learn about the various components of different motors, how they function, how to diagnose faults and how to repair them. At the end of the day, you’ll be able to check electric motors for faults and know how to recognise typical damage patterns.
https://www.tvh.com/training/technical-trainings/power-electronics/ac-dc-motors

  • E-learning via personal learning platform: available from 26/12/2021
  • Live virtual training: 26/1/2022 - 09h30 - 11h00 CET

VerreikerSEMHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 195
2 195
3+ 195
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 25

Get to the root of issues with electric machines quickly with our ‘Targeted fault-finding for electric industrial vehicles’ course. It’s designed to benefit engineers who are responsible for the maintenance and repair of electric machines, people who want to gain insight into performing diagnostics using electrical diagrams, and engineers looking to expand their skill sets to include maintenance and repair of electric machines. You should already have some prior knowledge about electricity and electric machines, including a basic understanding of how batteries and electric motors work. You’ll learn how to read electrical diagrams belonging to electric industrial vehicles. You’ll find out how to locate, recognise and check power components. And you’ll learn how to perform diagnostics using an electrical diagram and a multimeter.
https://www.tvh.com/training/technical-trainings/electronics/targeted-fault-finding-for-electric-industrial-vehicles

  • E-learning via personal learning platform    Available from 1/1/2022
  • Live virtual training , session 1    1/2/2022 - 14h00 - 15h30 CET
  • Live virtual training , session 2    8/2/2022 - 14h00 - 15h30 CET

VerreikerSEMHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 330
2 330
3+ 330
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 31

Need to find out what’s gone wrong with a machine that has an internal combustion engine? Then this course is for you. In ‘Targeted fault-finding for industrial vehicles with internal combustion engines’, you’ll learn how to perform diagnostics using electrical diagrams. It’s ideal for engineers who perform maintenance and repairs on machines with internal combustion engines. There are no prerequisites, although a basic understanding of the electrical aspects of machines with internal combustion engines will benefit you. You’ll find out all there is to know about electrical diagrams of machines with internal combustion engines, discover how to find different components on a diagram, and learn how to diagnose faults using the electrical diagram and a multimeter.
https://www.tvh.com/training/technical-trainings/electronics/targeted-fault-finding-for-industrial-vehicles-with-internal-combustion-engines

  • E-learning via personal learning platform    Available from 8/2/2022
  • Live virtual training , session 1    8/3/2022 - 09h30 - 11h00 CET
  • Live virtual training , session 2    15/3/2022 - 09h30 - 11h00 CET

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 297
2 280.5
3+ 264
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Mart 07

In-person training classes

‘Diagnostics and analysis of electrical signals’ is a 3-day, hands-on training course. Ideal for engineers who work with electrics and electronics, this course is designed to improve your fault-finding skills. You need to have some prior knowledge about performing measurements and fault-finding. In this course, you’ll learn all about common sensor and actuator signals, and gain a clear understanding of the operating principles of processing units. You’ll also discover how to search for faults in a targeted way, which will help you get to the root of problems quickly and improve your maintenance efficiency.
https://www.tvh.com/training/technical-trainings/power-electronics/diagnostics-and-analysis-of-electrical-signals

  • In person class and Practical training (Kidderminster) - 18-19-20/1/2022 - 08h30 - 17h00 CET

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 1035
2 1035
3+ 1035
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 17

This is a fast-paced world, and if your job involves the maintenance of diesel internal combustion engines, it's imperative that you know how to work with the latest technologies. Our 'New diesel technologies' course gives you the necessary insight. It's suitable for you if you already have a basic understanding of the operating principles of diesel combustion engines. In this 3-day course, you'll learn how different injection systems operate in diesel engines, how each individual engine component functions, and what you should pay attention to when performing maintenance. You'll get to know the new generation of electronic control systems and how to run diagnostic checks. And you'll discover how to work with different exhaust gas after-treatment systems. As a result, you'll perform diesel-engine maintenance with maximum effectiveness and efficiency.
https://www.tvh.com/training/technical-trainings/internal-combustion-engines/new-diesel-technologies

  • In person class and Practical training (Kidderminster) - 30-1-2/12/2021 - 08h30 - 17h00 GMT
Katılımcılar Fiyat (katılımcı başına)
1 995
2 995
3+ 995
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Aralık 29

Ever wondered how batteries work? If you work with electric machines, or just want to learn more about lead-acid traction batteries and their chargers, then this course is for you. To get the most out of it, you should already have an understanding of AC/DC motors, or experience working with them. At the end of the training, you’ll understand the operating principle of batteries and chargers, and you’ll be able to run diagnostic tests on them using a hydrometer and multimeter. You’ll also be able to match batteries to the right chargers, set them up correctly, and know how to install and calibrate a conventional charger. And last but not least, you will learn how to write up a battery report.
https://www.tvh.com/training/technical-trainings/power-electronics/batteries-and-chargers

  • In person class and Practical training (Kidderminster) - 3/12/2021 - 08h30 - 17h00 GMT

VerreikerSEMHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 395
2 395
3+ 395
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Aralık 02

Don’t know anything about hydraulics? Then ‘Preliminary stage hydraulics’ is the perfect place to start. In this foundation course, you’ll gain insight into the operating principles of hydraulics. You’ll learn how to recognise hydraulic parts, both in a diagram and on the machine. And you’ll get to know the functions performed by the common components found in hydraulics. This course is perfect for engineers with no prior knowledge about hydraulics, and it also functions as a foundation course for people looking to undertake our ‘Introduction to mobile hydraulics’ training course. But ‘Preliminary stage hydraulics’ is not just for engineers. It’s also a great benefit if you work in a sales, warehouse, or administration role because you’ll walk away with the knowledge you need to answer technical questions.
https://www.tvh.com/training/technical-trainings/hydraulics/preliminary-stage-hydraulics

  • In person class and Practical training (Waregem) - 18/1/2022 - 08h30 - 17h00 CET

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 395
2 395
3+ 395
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 17

How-to sessions

This interactive training course shows the most efficient way to use a multimeter, how to measure in an electrical circuit and how to find 85% of the faults with a 4-point measurement method.
https://www.tvh.com/taxonomy/term/1106/how-to-deal-with-85-of-electrical-faults

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 75
2 75
3+ 75
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Mart 27
Deadline to register Şubat 09

The advance of electrification of today's machinery is driving the evolution of new battery technology. Li-ion is taking the lead. Learn about the impact on the use, maintenance and safety of this new type of batteries in the workshop.

https://www.tvh.com/training/technical-trainings/how-to-sessions/how-to-handle-li-ion-batteries

VerreikerHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 75
2 75
3+ 75
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Şubat 21
Deadline to register Aralık 12

Industrial applications and material handling cannot be imagined without the use of hydraulics. In this session, you will gain insight into the construction of a system and the various components in a machine. What do we mean by pressure build-up, flow and power? All the important components are discussed separately, followed by the most logical diagnostic steps. To conclude, the emphasis is on safety when checking a machine!
https://www.tvh.com/training/technical-trainings/how-to-sessions/how-to-handle-your-hydraulic-systems

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 75
2 75
3+ 75
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 06

Due to the latest emission standards, a diesel engine is no longer conceivable without a common rail system. How is a common rail system constructed and what is the function of the components? During the session, you will gain insight into the working principle and the points of attention. Where are the pitfalls?
CAN bus is a communication system used in modern machines to transfer data from one module to another. How does this work? Where are the pitfalls and what is the impact on troubleshooting?

https://www.tvh.com/training/technical-trainings/how-to-sessions/how-to-handle-common-rail-engines-and-can-bus-communication

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 75
2 75
3+ 75
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Şubat 01

Complete packages

Need to know why an electric machine isn’t working properly? Find out how to uncover the problem quickly. ‘Introduction to targeted fault-finding’ is a course in which you’ll learn how electric machines operate, and how to find faults as easily as possible. It’s ideal for technicians who already perform maintenance on electric machines, or those wanting to acquire the expertise to do so. No prior knowledge or experience is required. You’ll learn how electricity enables these machines to work, and gain an understanding of how the electrical components function. You’ll also discover the how to use multimeters and ammeters properly, and find out how to trace faults in both the control and main power sections of electric machines.
https://www.tvh.com/training/technical-trainings/electronics/introduction-to-targeted-fault-finding

  • E-learning via personal learning platform - Available from 05/12/2021
  • Live Virtual Training,  session 1 - 05/1/2022 - 08h30 - 10h00 CET
  • Live Virtual Training,  session 2 - 12/1/2022 - 08H30 - 10h00 CET
  • Practical training, full day on location (Waregem) - 18/1/2022 - 08h30 - 17h00  CET

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 720
2 720
3+ 720
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 04

Ever wondered how batteries work? If you work with electric machines, or just want to learn more about lead-acid traction batteries and their chargers, then this course is for you. To get the most out of it, you should already have an understanding of AC/DC motors, or experience working with them. At the end of the training, you’ll understand the operating principle of batteries and chargers, and you’ll be able to run diagnostic tests on them using a hydrometer and multimeter. You’ll also be able to match batteries to the right chargers, set them up correctly, and know how to install and calibrate a conventional charger. And last but not least, you will learn how to write up a battery report.
https://www.tvh.com/training/technical-trainings/power-electronics/batteries-and-chargers

  • E-learning via personal learning platform - Available from 25/12/2021
  • Live Virtual Training - 25/1/2022 - 09h30 - 11h00 CET
  • Practical training, half day on location (Waregem) - 16/2/2022 - 08h30 - 12h30 CET

=> perfectly combinable with Digital Package + Practical training AC-DC motors.
=> perfectly combinable with Digital Package + Practical training Targeted fault-finding on electric mobile industrial applications.

VerreikerSEMHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 415
2 415
3+ 415
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 24

In our ‘AC/DC motors’ course, you’ll discover how large electric motors work (pump motors and drive motors), and what they’re used for. No prior knowledge is required. This course is designed to benefit engineers who work with electric machines. You’ll learn about the various components of different motors, how they function, how to diagnose faults and how to repair them. At the end of the day, you’ll be able to check electric motors for faults and know how to recognise typical damage patterns.
https://www.tvh.com/training/technical-trainings/power-electronics/ac-dc-motors

  • E-learning via personal learning platform - Available from 26/12/2021
  • Live virtual training - 26/1/2022 - 09h30 - 11h00 CET
  • Practical training, half day on location (Waregem) - 16/2/2022 - 13h00 - 17h00 CET

=> perfectly combinable with Digital Package + Practical training Batteries and chargers
=> perfectly combinable with Digital Package + Practical training Targeted fault-finding on electric mobile industrial applications.

VerreikerSEMHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 415
2 415
3+ 415
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 25

Need to find out what’s gone wrong with a machine that has an internal combustion engine? Then this course is for you. In ‘Targeted fault-finding for industrial vehicles with internal combustion engines’, you’ll learn how to perform diagnostics using electrical diagrams. It’s ideal for engineers who perform maintenance and repairs on machines with internal combustion engines. There are no prerequisites, although a basic understanding of the electrical aspects of machines with internal combustion engines will benefit you. You’ll find out all there is to know about electrical diagrams of machines with internal combustion engines, discover how to find different components on a diagram, and learn how to diagnose faults using the electrical diagram and a multimeter.
https://www.tvh.com/training/technical-trainings/electronics/targeted-fault-finding-for-industrial-vehicles-with-internal-combustion-engines

  • E-learning via personal learning platform    Available from 8/2/2022
  • Live virtual training , session 1 - 8/3/2022 - 09h30 - 11h00 CET
  • Live virtual training , session 2 - 15/3/2022 - 09h30 - 11h00 CET
  • Practical training, full day on location (Waregem) - 23/3/2022 - 08h30 - 17h00 CET

=> perfectly combinable with In person class and Practical training Intro common rail and CAN-bus.

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 770
2 770
3+ 770
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Mart 07

Get to the root of issues with electric machines quickly with our ‘Targeted fault-finding for electric industrial vehicles’ course. It’s designed to benefit engineers who are responsible for the maintenance and repair of electric machines, people who want to gain insight into performing diagnostics using electrical diagrams, and engineers looking to expand their skill sets to include maintenance and repair of electric machines. You should already have some prior knowledge about electricity and electric machines, including a basic understanding of how batteries and electric motors work. You’ll learn how to read electrical diagrams belonging to electric industrial vehicles. You’ll find out how to locate, recognise and check power components. And you’ll learn how to perform diagnostics using an electrical diagram and a multimeter.
https://www.tvh.com/training/technical-trainings/electronics/targeted-fault-finding-for-electric-industrial-vehicles

  • E-learning via personal learning platform - Available from 1/1/2022
  • Live virtual training , session 1 - 1/2/2022 - 14h00 - 15h30 CET
  • Live virtual training , session 2 - 8/2/2022 - 14h00 - 15h30 CET
  • Practical training, full day on location (Waregem) - 17/2/2022 - 08h30 - 17h00

=> perfectly combinable with Digital Package + Practical training Batteries and chargers
=> perfectly combinable with Digital Package + Practical training AC-DC motors  

VerreikerSEMHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 770
2 770
3+ 770
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Ocak 31

Technology moves fast. If you work with hydraulics, you need to stay up to date. ‘Introduction to mobile hydraulics’ is a course in which you’ll gain insight into the latest complex hydraulic systems. You need to know the basics to fully benefit from the course, so it’s ideal for engineers who are already familiar with machine maintenance. By participating in both theoretical and practical lessons, you’ll gain skills that will help you perform maintenance more efficiently and effectively than ever. You’ll learn all about how hydraulic components function, and find out how to perform diagnostic methods that enable you to highlight specific points of attention when running a diagnostic check on a hydraulic circuit. You’ll also learn how to use a hydraulic diagram to get a deeper understanding of how a hydraulic circuit is operating.
https://www.tvh.com/training/technical-trainings/hydraulics/introduction-to-mobile-hydraulics

  • E-learning via personal learning platform - Available from 10/10/2021
  • Live virtual training , session 1 - 10/11/2021 - 09h30 - 11h00 CET
  • Live virtual training , session 2 - 24/11/2021 - 09h30 - 11h00 CET
  • Live virtual training , session 3 - 26/11/2021 - 09h30 - 11h00 CET
  • Practical training, 2 full days on location (Waregem) - 8-9/12/2021 - 08h30 - 17h00 CET

VerreikerSEMHeftruckTractorHoogtewerker

Katılımcılar Fiyat (katılımcı başına)
1 1305
2 1305
3+ 1305
Katılımcı(lar) Fiyat (katılımcı başına) Toplam
Deadline to register Kasım 09
İleti̇şİm bi̇lgi̇leri̇ni̇z